LaCie 12big Rack Fibre 8 Instrukcja Użytkownika Pobierz pdf (Strona 10)

LaCie 12big Rack Fibre 8 System Overview

User Manual page 10

1.3.1. Bay Identiﬁcation

The bay identiﬁcation graphic is provided to assist with proper instal-

lation and location of components (Fig. 04).

Either RAID Controllers or Disk I/O Modules are installed in I/O

Module Bay’s #0 and #1. Bay #0 is the primary and Bay #1 is the

secondary. If only one module is installed, then a Blank I/O module

must be installed into the secondary (lower) empty bay. All PCM bays

must be populated. No bay will be left empty.

IMPORTANT INFO: Do not mix RAID Controllers and Disk I/O

Modules in the same enclosure.

1.3.2. Enclosure Drive Slots

The chassis assembly contains 12 drive slots located at the front of the

enclosure, each of which accommodates the appropriate plug-in drive

carrier module. A drive slot is deﬁned as the space required to house a

single 1.0” high 3.5 inch disk drive in its carrier module. The 12 drive

slots are arranged in a 3 row by 4 column conﬁguration.

Refer to 2.2.1. Enclosure Drive Slot Number Convention and 2.2.2.

Drive Location Rules for illustrated examples of the drive slot number-

ing and applicable rules for drive type installation. Expansion enclosure

drive slot numbering will pickup after the last numbered slot of the RAID

enclosure and continue incrementally to the maximum number. For ex-

ample, the ﬁrst Expansion enclosure slots will be numbered 13 - 24 and

the second enclosure slots numbered 25 - 36, and so forth until the

maximum number of drives (96) is reached.

1.3.3. Operator’s Panel

The front of the 12big Rack Fibre 8 enclosure incorporates

an Operator’s (OPS) panel with three LEDs and the Unit ID

LCD display (Fig. 05). The OPS panel provides the user with

a consolidated view of the operational status of the enclosure

components and the enclosures assigned ID. Please refer to

1.3.4. Visible Alarms - OPS LEDs for details of the LED status condi-

tions.

1.3.3.1. Audible Alarms

Audible alarms are provided as part of the notiﬁcation system which

can be muted via the OPS panel or StorView Storage Management

software. Refer to 4.3. Audible Alarm for details on the different

alarm states and their meanings.

1.3.3.2. Mute Button

The OPS panel button offers the option to silence the audible alarm.

Fig. 04 - Enclosure Bay Identiﬁcation

Fig. 05 - OPS Panel

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 86 87

Komentarze do niniejszej Instrukcji

Brak uwag

LaCie 12big Rack Fibre 8 Instrukcja Użytkownika Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Macierze dyskowe LaCie 12big Rack Fibre 8